“Monitor pump influencing conditions and control other equipment to ensure optimum operation of the entire process.”

“Measure a range of secondary para-meters and program a proper response.”

“Enable your system to change operating patterns or notify you directly if a specific process parameter exceeds a pre-set limit.”

“Avoid overheating and pump damage caused by dry-running. The directly connected Liqtec dry-running protection detects lack of water and too high liquid temperatures.”

“Enable your system to detect cavitation or loss of prime in the pump and stop operation before damage occurs.”

“Use the same measuring point for three purposes: As a primary control parameter, as part of a differential temperature measurement for set point influence or as a limit exceed response.”

“Control of one or more feed pumps can be operated from the main pump control. Level control in the feed tank can be controlled and supervised from the main pumps.”

“Link the primary control parameter to an external signal or internal measurement and automatically adjust it to best suit the process conditions.”

“Open up for monitoring and surveillance of additional process parameters and connect directly to the overall process control through a variety of industrial busses.”

“Control external equipment according to the pumps’ operating conditions, e.g. open bypass valves, start air injection or control mixing loop.”

“Control and supervise the break tank level and the feed pump directly from the motor to save wiring and other control components.”

“Enable system to initiate backwash sequence, controlling main pump, backwash pump, dosing pump and valves by measuring the condition of the filter. The sequence can be set up through a combination of measurements and timer function.”

“Avoid overheating and pump damage caused by dry-running. The directly connected Liqtec dry-running protection detects lack of water and too high liquid temperatures.”

“Set up a multi-pump unit to operate and appear as one single pump (open loop) and be controlled from external control system – or a pump unit can do surveillance and monitoring, and feed process data to the process control, while it simply operates at constant set point feed from the overall control system.”